Project Gallery
NOTE: Any white on the turf is infill sand that is sticking to the fibers of the turf through static electricity from the power broom. The infill normally settles in a couple days.
© 2024 Southern Artificial Turf.
TURF DETAIL
FIBER DETAIL
The fiber shall be 100% non-abrasive polyethylene designed specifically for outdoor use and treated with UV inhibitor and stabilizers to resist the effects of ultraviolet degradation, heat, foot traffic, water and airborne pollutants. The fiber shall meet or exceed EPA standards for RCRA hazardous waste heavy metals including lead. The fiber shall meet the following requirements:
BACKING DETAIL
The primary backing shall be a heat and UV resistant product. The primary backing shall provide dimensional stability in all directions to prevent stretching, and distortion upon installation. The secondary coating shall saturate the primary backing and effectively lock the fiber tufts in place. The backing shall meet the following requirements:
ROLL DETAIL
INFILL DETAIL
TURF DETAIL
FIBER DETAIL
The fiber shall be 100% non-abrasive polyethylene designed specifically for outdoor use and treated with UV inhibitor and stabilizers to resist the effects of ultraviolet degradation, heat, foot traffic, water and airborne pollutants. The fiber shall meet or exceed EPA standards for RCRA hazardous waste heavy metals including lead. The fiber shall meet the following requirements:
BACKING DETAIL
The primary backing shall be a heat and UV resistant product. The primary backing shall provide dimensional stability in all directions to prevent stretching, and distortion upon installation. The secondary coating shall saturate the primary backing and effectively lock the fiber tufts in place. The backing shall meet the following requirements:
ROLL DETAIL
INFILL DETAIL
TURF DETAIL
FIBER DETAIL
The fiber shall be 100% non-abrasive polyethylene designed specifically for outdoor use and treated with UV inhibitor and stabilizers to resist the effects of ultraviolet degradation, heat, foot traffic, water and airborne pollutants. The fiber shall meet or exceed EPA standards for RCRA hazardous waste heavy metals including lead. The fiber shall meet the following requirements:
BACKING DETAIL
The primary backing shall be a heat and UV resistant product. The primary backing shall provide dimensional stability in all directions to prevent stretching, and distortion upon installation. The secondary coating shall saturate the primary backing and effectively lock the fiber tufts in place. The backing shall meet the following requirements:
ROLL DETAIL
INFILL DETAIL
TURF DETAIL
FIBER DETAIL
The fiber shall be 100% non-abrasive polyethylene designed specifically for outdoor use and treated with UV inhibitor and stabilizers to resist the effects of ultraviolet degradation, heat, foot traffic, water and airborne pollutants. The fiber shall meet or exceed EPA standards for RCRA hazardous waste heavy metals including lead. The fiber shall meet the following requirements:
BACKING DETAIL
The primary backing shall be a heat and UV resistant product. The primary backing shall provide dimensional stability in all directions to prevent stretching, and distortion upon installation. The secondary coating shall saturate the primary backing and effectively lock the fiber tufts in place. The backing shall meet the following requirements:
ROLL DETAIL
INFILL DETAIL
TURF DETAIL
FIBER DETAIL
The fiber shall be 100% non-abrasive polyethylene designed specifically for outdoor use and treated with UV inhibitor and stabilizers to resist the effects of ultraviolet degradation, heat, foot traffic, water and airborne pollutants. The fiber shall meet or exceed EPA standards for RCRA hazardous waste heavy metals including lead. The fiber shall meet the following requirements:
BACKING DETAIL
The primary backing shall be a heat and UV resistant product. The primary backing shall provide dimensional stability in all directions to prevent stretching, and distortion upon installation. The secondary coating shall saturate the primary backing and effectively lock the fiber tufts in place. The backing shall meet the following requirements:
ROLL DETAIL
INFILL DETAIL